Architectural Coatings
 |
ACRYSHEEN – A clear, water-based acrylic sealer that provides a semi-gloss finish to a wide variety of surfaces. It can be used directly over concrete, exposed aggregate, brick or other masonry substrates to provide increased graffiti resistance and cleanability, or it can be applied as a topcoat over numerous United finishes, including Aquathon, Canyon Tone Stain, Acryclad, Uni-Tex and Roof Mate.
ACRYSHEEN PLUS – A cross-linking version of our standard Acrysheen, designed to provide increased graffiti resistance. It has a tougher, more chemical resistant finish that resists repeated scrubbing and tolerates harsher solvent cleaning. |
 |
AQUATHON – A 100% acrylic elastomer coating designed to bridge existing and future hairline cracks on concrete and masonry wall surfaces. It is an excellent choice for use on cast-in-place concrete, stucco, brick and block, and can also be used over wood surfaces. Aquathon is a breathing membrane, which will allow moisture vapor to escape from within the interior of the structure, while remaining impervious to moisture penetration from the exterior, even under severe conditions such as wind-driven rain. It remains permanently flexible and will not age harden or slump. Aquathon is available in a wide range of colors, including a selection of metallic finishes.
AQUATHON 150 – An economical elastomeric coating system for waterproofing exterior concrete and masonry walls. The system combines a highly adhesive basecoat with a UV resistant topcoat, to bridge existing and future hairline cracks. The base coat can also be used in conjunction with standard Aquathon. Technical Data >> |
 |
CANYON TONE CLEAR (CTC) CONCENTRATE– A water-based silane sealer blended with silicone resins in an economical concentrate form. It can be diluted with water to yield from 5% to 15% solids, as per project requirements. A 5% to 10% solids dilution is typically used on vertical substrates, while a 10% to 15% dilution is used on horizontal applications. The silane molecules are able to penetrate deeply into concrete substrates, where they react with the concrete matrix to provide long term resistance to water and chloride ion penetration from within. The silicone additive provides a degree of surface beading, however, this product is not designed to provide long-term water beading on the surface. Once dried, the product is designed to be invisible, with no surface sheen or darkening of the substrate. Technical Data >>
CANYON TONE CLEAR - (CTC) 5%– A pre-diluted version of CANYON TONE CLEAR CONCENTRATE, for use primarily on vertical concrete and masonry surfaces. Effectively reduces water and chloride ion penetration. CANYON TONE CLEAR (CTC) HPC– A heavy-bodied version of CANYON TONE CLEAR for use on vertical and overhead applications. The cream-like consistency holds the 80% active silane on the concrete surface and prevents rapid evaporation, thus maximizing penetration into the concrete matrix for maximum water and chloride ion penetration.
|
 |
CANYON TONE STAIN - WATER-BASED – An acrylic polymer blended with silicone resins, designed to seal concrete and masonry surface with a water-repellent, color stable finish. Able to lock into surface pores due to it’s low viscosity and penetration ability. CANYON TONE STAIN forms an opaque film, yet it is much thinner than typical paint finishes, allowing it to wear like the natural substrate. Will not peel, flake or crack. Suitable for cast-in-place concrete, precast concrete, GRC concrete, masonry and stucco substrates. Canyon Tone Stain is available in a wide range of colors, including a selection of metallic finishes.
SOLVENT-BASED – A methyl methacrylate acrylic in a solvent carrier, designed to provide the same long term water repellency and color stability as the water-based version. |
 |
GRAFFITI SHIELD – A two-component, water-based, urethane modified acrylic coating designed to allow easy removal of graffiti and other stains from treated surfaces. It is highly resistant to most types of aerosol spray paint and permanent markers, and will hold up to repeated cleaning and scrubbing. It imparts a durable finish that also provides long-term water repellency, dirt resistance and weather protection.
|
 |
IN-STONE – A semi-transparent concrete and masonry sealer designed to provide uniform color to architectural block and other substrates. It is supplied in a Clear Base, which can be tinted locally to one of several standard or custom colors. In-Stone is not intended to provide water-repellency properties.
|
 |
IN-WOOD – The ultimate in exterior wood protection, In-Wood combines 3 different penetrating oils with micro-pigments, enabling both to penetrate deeply into the wood grain. It provides long term protection to all types of wood on exterior siding and log homes, fences, decks, docks, etc.
|
 |
MASTER WALL – A water-based, synthetic stucco finish that can be used in conjunction with EIFS or directly applied over concrete or masonry substrates. Master Wall is available in a wide variety of colors and several finish textures, for use on new or retrofit applications.
|
|
Note: Adhesion Promoter is available for all of the above products to enhance adhesion over dense and/or slick surfaces such as glass, tile and glazed brick. |
|
 |
RHINO TOP – A water-based acrylic deck coating with an epoxy additive for added wear resistance. Provides color and optional non-skid to concrete or asphalt surfaces, such as tennis/sport courts, balconies, lanais, walkways, patios, etc. |
PRIMERS
|
|
 |
ACRYLEX 400– An excellent universal, water-based acrylic primer for use under a variety of United’s acrylic Roofing, Industrial and Architectural products. Provides alkali resistance over concrete, corrosion resistance over metal and tannin-blocking over wood substrates. More information >>
|
|
PRIMER 708– A water-based, resinous primer for use over existing chalky substrates under United’s exterior wall coatings and paint. Also provides alkali resistance over concrete substrates. Technical Data >>
|
|
 |
UNISEAL– A penetrating water-based epoxy primer/sealer for use over concrete and wood substrates under United’s water-based finishes. More details >> |
 |
UNITED CLEANING CONCENTRATE– A biodegradable cleaning concentrate that is mixed with water to effectively remove dirt, dust, grease, oil, pollution, and other contaminants from walls and decks prior to coating, or during routine maintenance. More Details >> |
 |
 |
 |
 |
 |
 |
 |
 |