ELASTUFF 101/102 is a high solids, moisture-catalyzed, single-component polyurethane coating system. The system consists of ELASTUFF 101, an aromatic polyurethane basecoat, and ELASTUFF 102, a UV-resistant, color stable aliphatic polyurethane topcoat. ELASTUFF 103, a low VOC aliphatic topcoat is also available to meet VOC regulations in specific areas. This combination provides an excellent balance of tensile strength, elongation and hardness, resulting in superior durability, dirt and mildew resistance, chemical resistance and weatherproofing. High abrasion and impact resistance also offer protection from maintenance traffic and severe weather conditions.
The fire retardant chemicals are permanently locked into the cured coating and will not leach out upon extended weathering. ELASTUFF 101/102 is a “breathing” coating, allowing moisture vapor to pass through the film while remaining impervious to mass water penetration from the exterior.
For Tech Data sheets, MSDS, and Specifications, click here.
The ELASTUFF 101/102 System is designed for protecting a wide range of substrates from the effects of weathering and moisture intrusion. It is particularly effective as a protective membrane over new or existing roof substrates, including concrete, metal and asphaltic substrates. It provides a barrier to the effects of degradation caused by normal weathering, aging and ultraviolet exposure. ELASTUFF 101/102 is also effective when used on other horizontal or vertical applications requiring a tough, abrasion and chemical resistant membrane, such as secondary containment.
For information on protection over sprayed-in-place polyurethane foam insulation, refer to separate ELASTUFF 101/102/103 Technical Data in UNITED’S Polyurethane Foam Coatings Division catalogue. ELASTUFF 101, 102 and ELASTUFF 103 are single-component elastomers that are catalyzed through exposure to moisture in the air. They are designed for application through standard airless spray equipment, as well as brush, roller, squeegee or notched trowel.