ELASTUFF Single and Plural Component Coatings

ELASTUFF 101/102/103  - ELASTUFF 101/102 This system consists of a single component aromatic basecoat and a highly UV/color stable single component aliphatic topcoat. Both components can be applied by brush, roller or airless spray over a variety of substrates. For use wherever a durable, chemical resistant elastomeric finish is desired. ELASTUFF 103 is a low VOC version of the aliphatic topcoat, meeting all known VOC regulations. ELASTUFF 102/103 can also be used as finish coats on their own over appropriate primers.

ELASTUFF 110 - This 100% solids, fast-cure polyurethane is classified as a "rigid" or "structural" membrane. It is a high durometer product exhibiting excellent resistance to crude oil, fuel oils, gasoline, jet fuel, etc. It is also ideal for lining metal storage tanks & vessels, as well as interior pipelines.

ELASTUFF 120 - This 100% solids polyurethane/polyurea hybrid is designed primarily for lining concrete tanks, as it has an ideal balance of tensile strength, elongation and hardness. It is also ANSI/NSF 61 classified for use in potable water storage, processing and transfer applications. Typical applications include lining waste/water treatment tanks, water flumes, cooling towers, power plants, etc., as it has excellent resistance to long-term immersion in water, salt water and alkaline solutions. It is available in spray grade, roller grade and mastic formulations.

ELASTUFF 160  -This 100% solids, polyurethane/polyurea hybrid is a high durometer, primerless metal coating, although it has approximately 20% elongation, giving it good resiliency and high impact resistance. It has excellent resistance to long-term immersion in water, seawater and alkalines, as well as good resistance to ketones. It is used for coating steel and ductile iron pipes, pipe and sheet pilings, rail cars, and other applications requiring a durable, flexible metal finish.

ELASTUFF 200 - This 100% solids elastomer is an extremely tough, “pure” aliphatic polyurea, exhibiting excellent tensile strength, elongation and hardness properties. It can be used on its own or as a topcoat over any of our aromatic polyurethanes or polyureas. It is also available in an anti-fouling formulation for marine use.

ELASTUFF 210  - Aliphatic polyaspartic polyurea, which can be used on its own or as a topcoat over any of our aromatic polyurethanes, polyureas or hybrids. It is 100% solids by volume, and can be reduced to extend the pot life. Outstanding chemical resistance and durability make it an excellent choice for warehouse and factory floors, as well as tank exteriors and structural steel protection. It is available in several standard colors, as well as clear, with custom tinting available.

ELASTUFF 300 - This 100% solids, “pure" aromatic polyurea coating is formulated to achieve optimum tensile strength, tear strength and elongation properties. This superior balance of physical properties, good chemical resistance and imperviousness to high humidity and cold substrate temperatures make it an excellent all-around membrane. It can be used as a liner, as well as for secondary containment, basins and slurries, and other applications requiring a tough, durable membrane.

ELASTUFF 310 - This 100% solids polyurea has an excellent balance of tensile strength, elongation and hardness for use in a wide variety of conditions. It has good chemical resistance and is also impervious to high humidity and cold substrate temperatures. It is suitable wherever a resilient, abrasion resistant, waterproofing membrane is required, including bridge deck membraning, tunnels, secondary containment, waste/water treatment, manhole lining, cooling towers, foam stock, below grade waterproofing, geotextile fabric liners, evaporation ponds, etc.

PRIMERS