Industrial
High-build polyurethane elastomers provide corrosion and abrasion protection in water and chemical environments. High tensile strength and elongation characteristics allow protection from a wide variety of abrasion conditions. Fast-cure, highly cross-linked properties result in extremely durable membranes with minimal downtime required for application.
There are a number of different products within our Elastuff System and they include the following:
-
Elastuff 101/102/103
Effective over concrete, metal and asphaltic substrates
-
Elastuff 110
Used for coating O.D. pipe, interior tank lining, valves, and all areas subject to solvents, oils and other hydrocarbons. It is an outstanding barrier to aromatic as well as aliphatic solvents.
-
Elastuff 120
A two component, 100% solids polyurethane elastomer coating containing no mocha or fillers such as clay or mica, and is NSF-approved. It was designed for protecting surfaces subject to abrasion in aqueous solutions or environments, including water, salt water, various slurry systems, and numerous acid and base solutions. It is equally effective under dry abrasive and/or corrosive environments.
-
Elastuff 120 Mastic
A two-component, 100% solids polyurethane elastomer in a high-build, mastic consistency. This system provides a limited workable pot life, and therefore does not require specialized application equipment.
-
Elastuff 160
A two-component, 100% solids polyurethane coating system. This unique thermosetting rubber is especially formulated to achieve exceptional adhesion to properly prepared metal surfaces without the need for separate primer coat.
-
Elastuff 300
Especially developed for providing waterproofing, corrosion protection, chemical resistance, and/or abrasion and impact resistance over a wide variety of vertical and horizontal substrates. It can be used over primed steel, concrete, wood, fiberglass, geotextile fabric and foam substrates.
-
Elastuff 310
Especially developed for providing waterproofing, corrosion protection, chemical resistance, and/or abrasion and impact resistance over a wide variety of vertical and horizontal substrates. It can be used over primed steel, concrete, wood, fiberglass, geotextile and foam substrates.
-
Elastuff 320
Especially developed for providing a durable waterproof membrane over vertical and horizontal concrete and masonry substrates subject to aqueous environments. It also provides a high degree of corrosion protection, as well as chemical, abrasion and impact resistance. ELASTUFF 320 can also be used over primed metal, concrete, wood, fiberglass, geotextile fabric and foam substrates (EPS, isocyanurate or polyurethane).
PRIMER 302 LV is a two-component, high performance corrosion resistant primer. It combines corrosion inhibiting pigments with a crosslinking polymer resin to form a highly stable polymer-pigment matrix. PRIMER 302 LV creates a physical and chemical bond between the substrate and polyurethane/polyurea elastomers. This superior bond strength is achieved by chemically crosslinking the polymer in the primer to the polyurethane/ polyurea elastomer topcoat.
 |
 |
 |
 |
 |
 |
 |
 |