Home | Products | Corporate | International | MSDS | Tech Data | Shipping | Contacts |
 
 

 

Elastuff 101/102
(for polyurethane foam)

Elastuff 101/102
(other substrates)

Elastuff 120 Technical Data
(PDF 256KB)

ELASTUFF 120 MASTER GUIDE SPEC (PDF 164 KB)

ELASTUFF 120 MASTIC
(PDF 232 KB)

Elastuff 120 HE
(PDF 258KB)

Elastuff 120
UL 61 "C"

(PDF 25
4KB)

Elastuff 160
(PDF 288 KB)

ELASTUFF 160 MASTER GUIDE SPEC (282 KB)

ELASTUFF 160
STEEL PIPE
MATER GUIDE
SPEC (278 KB)

ELASTUFF 200
(PDF 88 KB)

ELASTUFF 210
(PDF 105 KB


ELASTUFF 220
(PDF 87 KB)

ELASTUFF 300
(PDF 105 KB)

ELASTUFF 310
(PDF 278KB)

ELASTUFF 320
(PDF 265KB)

Elastuff 504
(PDF 154 KB)

Elastuff 110
(PDF 322KB)

 

 

 

 

ELASTUFF SYSTEMS

High-build polyurethane elastomers provide corrosion and abrasion protection in water and chemical environments. High tensile strength and elongation characteristics allow protection from a wide variety of abrasion conditions. Fast-cure, highly cross-linked properties result in extremely durable membranes with minimal downtime required for application.

BASIC USES
ELASTUFF is used over a wide variety of vertical and horizontal primed concrete, steel, iron, wood, fiberglass and polyurethane foam surfaces. Typical applications include all types of abrasion conditions, as well as interior tank lining, waste/water treatment and containment, sewer manholes, flumes, reservoirs, cooling tower basins, valves, interior pipe and other areas subjected to dry or aqueous chemical environments.

PRODUCT DESCRIPTION

The ELASTUFF 101/102 system is designed for protecting a wide range of substrates from the effects of weathering and moisture intrusion. It is particularly effective as a protective membrane over polyurethane foam on new or existing roofs, and hot or ambient storage tanks.

The ELASTUFF 101/102 System is also effective over concrete, metal and asphaltic substrates

ELASTUFF 110 is used for coating O.D. pipe, interior tank lining, valves, and all areas subject to solvents, oils and other hydrocarbons. It is an outstanding barrier to aromatic as well as aliphatic solvents.


ELASTUFF 120 is a two component, 100% solids polyurethane elastomer coating containing no mocha or fillers such as clay or mica, and is NSF-approved. It was designed for protecting surfaces subject to abrasion in aqueous solutions or environments, including water, salt water, various slurry systems, and numerous acid and base solutions. It is equally effective under dry abrasive and/or corrosive environments.

ELASTUFF 120 HE is used over a wide variety of vertical and horizontal primed concrete, steel, iron, wood, fiberglass and polyurethane foam surfaces. Typical applications include interior tank lining, waste/water containment, sewer manholes, flumes, reservoirs, cooling tower basins, valves, interior pipe and other areas subjected to aqueous chemical environments.

ELASTUFF 120 POTABLE WATER CONTAINMENT COATING Classified by Underwriters Laboratories Inc. in Accordance with ANSI/NSF Standard 61 “C” for Commercial Hot Water Applications.

ELASTUFF 160 is a two-component, 100% solids polyurethane coating system. This unique thermosetting rubber is especially formulated to achieve exceptional adhesion to properly prepared metal surfaces without the need for separate primer coat.

ELASTUFF 300 was especially developed for providing waterproofing, corrosion protection, chemical resistance, and/or abrasion and impact resistance over a wide variety of vertical and horizontal substrates. It can be used over primed steel, concrete, wood, fiberglass, geotextile fabric and foam substrates.

ELASTUFF 310 was especially developed for providing waterproofing, corrosion protection, chemical resistance, and/or abrasion and impact resistance over a wide variety of vertical and horizontal substrates. It can be used over primed steel, concrete, wood, fiberglass, geotextile and foam substrates.

ELASTUFF 320 was especially developed for providing a durable waterproof membrane over vertical and horizontal concrete and masonry substrates subject to aqueous environments. It also provides a high degree of corrosion protection, as well as chemical, abrasion and impact resistance. ELASTUFF 320 can also be used over primed metal, concrete, wood, fiberglass, geotextile fabric and foam substrates (EPS, isocyanurate or polyurethane).

ELASTUFF 504 is a two-component, high tensile strength polyurethane elastomer coating. This unique thermosetting rubber is especially formulated to achieve outstanding abrasion resistence, superior tensile strength and excellent hydrolytic stability. ELASTUFF 504 is a highly cross-linked coating exibited a rapid curing property through the polymerization of isocyanate and amine-terminated reactive ingredients.

 

 

 

 

 

 

 

Home | Products | Corporate | International | MSDS Library | Tech Data | Shipping | Contact Us | Chinese