|
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
|
|
Technical Data
Construction Products
| COATING |
Description |
Tech Data |
Web Page |
|
| ACRYCLAD |
ACRYCLAD was developed as a protective
finish for interior or exterior exposure on a variety of surfaces including
wood, hardboard siding, concrete, masonry, plaster, galvanized metal,
aluminum, steel and existing painted surfaces.
|
72KB
|
|
|
| ACRYLEX100 |
ACRYLEX 100 was specifically developed for protection
of properly primed metal, concrete, wood, fiberglass, plastic, Formica,
glass and other surfaces that are subject to corrosion and ultraviolet
exposure.
|
73 KB |
|
|
| ACRYSHEEN |
ACRYSHEEN was specifically developed as a penetrating
sealer for use over properly prepared smooth or textured concrete,
exposed aggregate concrete, brick, stone or stucco surfaces where
a semi-gloss sheen is desired. |
67KB |
|
|
| AQUATHON® |
AQUATHON is a fluid applied acrylic membrane waterproofing
system designed for application over concrete,
masonry, stucco and other appropriate building exteriors.
|
76 KB |
|
|
| AQUATHON 150 |
AQUATHON 150 was specifically developed to waterproof
vertical concrete and masonry building exteriors. It has the ability
to uniformly cover the profile of textured substrates, forming a
continuous
membrane resistant to all forms of weather and airborne pollutants. |
106 KB |
|
|
| CANYON TONE STAIN ® "W" |
CANYON TONE STAIN corrects natural color imperfections
in the substrate by imparting permanent color uniformity plus water-repellency,
without disturbing the natural texture of the substrate. It is
not designed for application to horizontal surfaces.
|
88KB |
Canyon Tone Stain web site |
|
| CANYON TONE CLEAR |
CANYON TONE CLEAR, a silicone emulsion with reactive
silane, is a deep penetrating concrete/masonry sealer and water-repellent
treatment.
|
67 KB |
Canyon
Tone Stain web site |
|
| CANYON TONE CLEAR CONCENTRATE |
CANYON TONE CLEAR CONCENTRATE, a silicone emulsion with reactive
silane, is a deep penetrating concrete/masonry sealer and water-repellent
treatment.
CANYON TONE CLEAR CONCENTRATE
must be reduced with water at the jobsite to
achieve the desired dilution.
|
104 KB |
Canyon
Tone Stain web site |
|
| IN-STONE |
IN-STONE is a water-based, modified acrylic designed
to penetrate porous vertical concrete and masonry surfaces. IN-STONE
is supplied as a Clear Base, which can be easily tinted to produce
a variety of colors.
|
151 KB
|
The
IN-STONE page |
|
| ELASTRON® |
ELASTRON was developed primarily for application as
a vapor barrier over polyurethane foam, concrete and masonry, wood
and metal. The outstanding properties of the coating have created
successful applications throughout the world over roofs, in high
humidity areas, controlled atmosphere rooms, dry kilns, cold storage
areas, over insulated pipelines and cryogenic storage tanks — wherever
an effective vapor barrier is required.
|
111 KB |
|
|
| ELASTUFF 110 |
ELASTUFF 110 is a two-component, 100% solids rigid polyurethane coating, designed to withstand a wide variety of solvents, petroleum and sour crude oil. It was especially formulated to achieve a unique balance of hardness, high tensile strength, flexibility and chemical resistance. |
235 KB
|
|
|
| ELASTUFF 120 Spray or Roller Grade (1:1) |
ELASTUFF 120 is a two-component, 100% solids
polyurethane elastomer coating used over a wide variety of vertical
and horizontal primed concrete, steel, iron, wood, fiberglass and
polyurethane foam surfaces.
|
240 KB |
|
|
| ELASTUFF 120 Mastic (1:1) |
ELASTUFF 120 MASTIC is a two-component, 100% solids
polyurethane elastomer in a high-build, mastic consistency. Used
as a sealant, caulk, filler, bonding agent and finish where hydrophobic,
abrasion and chemical resistance properties are required.
|
242 KB |
|
|
| ELASTUFF 120HE |
ELASTUFF 120HE is used over a wide variety of vertical and horizontal primed concrete, steel, iron, wood, fiberglass and polyurethane foam surfaces. Typical applications include interior tank lining, waste/water containment, sewer manholes, flumes, reservoirs, cooling tower basins, valves, interior pipe and other areas subjected to aqueous chemical environments.
|
253 KB |
|
|
| |
|
|
|
|
| ELASTUFF 160 (1:1) |
ELASTUFF 160 is a two-component,
100% solids polyurethane coating system. It is extremely effective
as a tank or pipe lining subject to fresh water, salt water and slurry
solutions, as well as a wide range of fuels, oils and other hydrocarbons.
|
253 KB
|
|
|
| ELASTUFF 200 |
ELASTUFF 200 is a high performance, 100% solids, pure polyurea elastomer coating manufactured using pure aliphatic isocyanate resins reacted with amine pre-polymers. It cures rapidly to form a highly durable membrane exhibiting excellent gloss and color retention.
|
66 KB |
|
|
| ELASTUFF 210 |
ELASTUFF 210 is a high performance, 100% solids coating manufactured using pure aliphatic polyaspartic polyurea resins. It forms a highly cross-linked, durable membrane exhibiting excellent gloss and color retention.
|
68 KB |
|
|
| ELASTUFF 220 |
ELASTUFF 220 is a premium performance, high solids coating manufactured using pure aliphatic polyaspartic polyurea resins. It forms a highly cross-linked, durable membrane exhibiting excellent gloss and color retention.
|
68 KB |
|
|
| ELASTUFF 300 (1:1) |
ELASTUFF
300 was especially developed for providing waterproofing,
corrosion protection, chemical resistance, and/or abrasion and
impact resistance over a wide variety of vertical and horizontal
substrates. It can be used over primed steel, concrete, wood,
fiberglass, geotextile fabric and foam substrates.
|
105 KB |
|
|
| ELASTUFF 310 |
ELASTUFF 310 was
especially developed for providing waterproofing, corrosion protection,
chemical resistance, and/or abrasion and impact resistance over a
wide variety of vertical and horizontal substrates. It can be used
over primed steel, concrete, wood, fiberglass, geotextile and foam
substrates.
|
287 KB
|
|
|
ELASTUFF 320
Manufactured in Beijing, China |
ELASTUFF 320 was especially developed for providing
a durable waterproof membrane over vertical and horizontal concrete
and masonry substrates subject to aqueous environments. It also provides
a high degree of corrosion protection, as well as chemical, abrasion
and impact resistance. ELASTUFF 320 can also be used over primed
metal, concrete, wood, fiberglass, geotextile fabric and foam substrates
(EPS, isocyanurate or polyurethane).
|
287 KB |
|
|
| IN-WOOD |
IN-WOOD Stain is an exterior wood
stain designed to protects wood against degradation from water, ultraviolet
radiation (sunlight) and fungi. Ideal for wood decks, fences, siding
and log homes.
|
86 KB
|
IN-WOOD web site |
|
| |
|
|
|
|
| RHINO TOP Smooth or Textured |
RHINO TOP was specifically developed for use over
concrete, masonry, stucco, plaster and asphalt surfaces where a durable
colored coating is required.
|
88 KB
|
RHINO TOP |
|
| |
|
|
|
|
SURFACE PREPARATION
| Product |
Description |
Tech Data |
Web Page
|
|
| PRIMER 302 (4:1) |
PRIMER 302 is a two-component, high performance
corrosion resistant primer.
|
185 KB
|
|
|
| PRIMER 708 |
PRIMER 708 can be used to increase the
bond over new or unpainted wood substrates. Also effective to lock
down residual chalkiness on previously painted exterior surfaces.
|
69 BK |
|
|
| UNISEAL Primer |
UNISEAL is a clear,
single-component epoxy primer/sealer designed to penetrate and seal
porous substrates and to improve the adhesion of high performance
topcoats.
|
66 KB
|
|
|
| UNITED CLEANING CONCENTRATE (UCC) |
UNITED CLEANING
CONCENTRATE was especially
developed for the proper cleaning of existing elastomeric coating
on roofs, metal surfaces, concrete and masonry substrates as well
as uncoated roof, deck and wall surfaces.
|
70 KB
|
|
|
| UNI-TILE SEALER LV (1:1) |
UNI-TILE SEALER LV is a two-component, quick
drying epoxy polyamide penetrating primer/sealer used to seal porous
substrates and to improve adhesion when applying epoxy and polyurethane
topcoats.
|
74 KB
|
|
|
| UNI-CRETE |
UNI-CRETE is a ready-mixed, single component
formula of cement, sand and proprietary additives, designed as an
economical alternative to the replacement of existing concrete, asphalt,
wood and metal surfaces.
|
174 KB |
|
|
| |
|
|
|
|
Polyurethane Foam
ACRYLIC ELASTOMER COATINGS
| SUNSHIELD |
SUNSHIELD was especially developed for
protecting polyurethane foam insulation, as well as extending the
life of new or existing built-up, metal, concrete, modified bitumen,
single-ply and composite shingle roofs by providing a white reflective
topcoat.
|
128 KB
|
|
|
| ACRON 60 (White, Medium Gray, Light Gray) |
ACRON 60 is a 60%
solids elastomeric acrylic coating that provides good weatherability,
ultraviolet resistance, and fire retardancy for the protection of
polyurethane foam.
|
85 KB
|
|
|
| DIATHON® (White, Medium Gray, Light Gray, Light Tan) |
DIATHON is a advanced
acrylic elastomer coating that combines high solids emulsion polymers,
reinforcing laminar pigments, biocides and nonmigrating fire retardants
for superior durability, weatherproofing, mildew resistance, ultraviolet
resistance and fire resistance.
|
106 KB
|
The DIATHON web page |
|
| DIATHON® HT (High Tensile)
White, Medium Gray, Light Gray, Light Tan |
DIATHON HT is a unique
advanced acrylic elastomer coating which combines high tensile emulsion
polymers, reinforcing laminar pigments and non-migrating fire retardants
for superior physical properties, durability, weatherproofing, dirt
and mildew resistance, ultraviolet resistance and fire retardancy.
|
100 KB
|
The
DIATHON web page |
|
| DIATHON® 4500 Pearl White, Medium
Gray, Light Gray |
DIATHON 4500 was especially
developed to provide protection for sprayed-in-place polyurethane
foam roof and tank systems.
|
96 KB |
|
|
| DIATHON BASECOAT |
DIATHON
BASECOAT was specifically
developed for protecting sprayed polyurethane foam insulation from degradation
caused by normal weathering, aging and ultraviolet exposure. |
93KB |
|
|
SILICONE ELASTOMERS COATING
| COATING |
Description |
Tech Data |
Web Page |
|
| UNISIL - Dark Gray, Light Gray, White |
UNISIL is a high volume solids,
pure elastomeric silicone coating that provides superior weatherproofing,
ultraviolet resistance and fire retardancy over polyurethane foam
insulation and other appropriate substrates.
|
130 KB
|
|
|
| |
|
|
|
|
POLYURETHANE COATINGS
| COATING |
Description |
Tech Data |
Web Page |
|
| ELASTUFF 101 /102/103 |
ELASTUFF 101/102/103 is a high solids, moisture-catalyzed,
single-component polyurethane coating system designed for protecting
a wide range of substrates from the effects of weathering and moisture
intrusion. It is particularly effective as a protective membrane
over polyurethane foam on new or existing roofs, and hot or ambient
storage tanks. ELASTUFF
101/102/103, a UV-resistant, 100% aliphatic polyurethane topcoat. ELASTUFF 103 is a low VOC version of the aliphatic topcoating, which meets all known VOC regulations.
|
98 KB |
|
|
| |
|
|
|
|
BUTYL RUBBER VAPOR BARRIER COATING
| COATING |
Description |
Tech Data |
Web Page |
|
| ELASTRON® |
ELASTRON was developed primarily
for application as a vapor barrier over polyurethane foam, concrete
and masonry, wood and metal. The outstanding properties of the coating
have created successful applications throughout the world over roofs,
in high humidity areas, controlled atmosphere rooms, dry kilns, cold
storage areas, over insulated pipelines and cryogenic storage tanks — wherever
an effective vapor barrier is required.
|
111 KB
|
|
|
| |
|
|
|
|
PRIMERS
| COATING |
Description |
Tech Data |
Web Page |
|
| UNI-TILE SEALER LV (1:1) Clean, Black |
UNI-TILE SEALER LV is a two-component,
quick drying epoxy polyamide penetrating primer/sealer used to seal
porous substrates and to improve adhesion when applying epoxy and
polyurethane topcoats.
|
66 KB |
|
|
| UNISEAL |
UNISEAL is a clear, single-component
epoxy primer/sealer designed to penetrate and seal porous substrates
and to improve the adhesion of high performance topcoats.
|
74 KB |
|
|
| UNITED CLEANING CONCENTRATE (UCC) |
UNITED CLEANING CONCENTRATE was especially
developed for the proper cleaning of existing elastomeric coating
on roofs, metal surfaces, concrete and masonry substrates as well
as uncoated roof, deck and wall surfaces.
|
70 KB |
|
|
| Primer 302 LV |
PRIMER 302 LV is a two-component, high performance corrosion resistant primer. It combines corrosion inhibiting pigments with a crosslinking polymer resin to form a highly stable polymer-pigment matrix. PRIMER 302 LV creates a physical and chemical bond between the substrate and polyurethane/polyurea elastomers. This superior bond strength is achieved by chemically crosslinking the polymer in the primer to the polyurethane/ polyurea elastomer topcoat. |
178 KB |
|
|
KYMAX
| COATING |
Description |
Tech Data |
Web Page |
|
| KYMAX |
KYMAX is an innovative technology based on Kynar Aquatec PVDF fluoropolymer resin, designed to deliver the proven durability and performance of traditional Kynar™ PVDF coatings.
|
128 KB |
|
|
| KYMAX BASECOAT |
KYMAX BASECOAT is a high solids elastomeric acrylic coating designed for use in conjunction with KYMAX Topcoat to provide superior weatherability, ultraviolet resistance, and fire retardancy over roof and wall substrates.
|
113 KB
|
|
|
ROOF MATE
PRODUCTS
| COATING |
Description |
Tech Data |
Web Page |
|
| ROOF MATE - White, Lt. Gray, Medium Gray |
ROOF MATE is a water-based, high
solids elastomeric coating utilizing the latest advances in acrylic
technology. ROOF MATE was especially developed
for extending the life of metal, conventional built-up, modified
bitumen, concrete, Hypalon®, EPDM, sprayed-in-place or board-stock
insulation, or composite shingle roofs.
|
115 KB
|
|
|
| ROOF MATE Basecoat - Gray |
ROOF MATE BASECOAT is a 60% volume
solids, water-based acrylic elastomer coating especially developed
for use in embedding reinforcement fabric at detail areas and/or
over the entire roof.
|
86 KB
|
|
|
| ROOF MATE Ceramic - White |
ROOF MATE CERAMIC is a high solids,
waterbased acrylic elastomer coating incorporating heat reflective,
borosilicate ceramic spheres.
|
92 KB
|
|
|
| ROOF MATE HT (High Tensile) - White, Lt. Gray, Medium Gray |
ROOF MATE HT is a unique water-based
elastomer coating utilizing the latest advances in acrylic technology
for roof areas subject to heavy maintenance traffic, severe weather
conditions, chemical fallout, etc.
|
127 KB
|
|
|
| ROOF MATE LP (Asphaltic Substrates) - White, Lt. Gray, Medium Gray |
ROOF MATE LP is a unique water-based
elastomeric coating specifically designed to achieve optimum adhesion
over new or existing smooth modified bitumen or other asphaltic roof
substrates. ROOF MATE LP combines advanced acrylic
polymers with reinforcing laminar pigments and non-migrating fire
retardants for superior physical properties, durability, and weatherproofing.
|
89 KB
|
|
|
| ROOF MATE Butter Grade - White, Lt. Gray |
ROOF MATE BUTTER GRADE is a water-based,
high solids elastomeric sealant with a thick, buttery consistency
allows it to be easily worked into vertical seams on metal roofs,
gaps in flashings and around protrusions, and into heavily alligatored
areas in weathered built-up roofing.
|
64 KB |
|
|
| ROOF MATE FABRIC & ROOF MATE MESH |
ROOF MATE FABRIC and ROOF MATE MESH are stichbonded
100% polyester materials made specifically for use with elastomeric
coatings in roof membrane construction.
|
88 KB
|
|
|
| ROOFSHIELD® - White, Lt. Gray, Medium Gray |
ROOFSHIELD was especially developed for extending
the life of new or existing built-up, metal, concrete, single-ply
and composite shingle roofs by providing a white reflective topcoat.
|
95KB
|
|
|
| SUNSHIELD |
SUNSHIELD was especially developed
for protecting polyurethane foam insulation, as well as extending
the life of new or existing built-up, metal, concrete, modified bitumen,
single-ply and composite shingle roofs by providing a white reflective
topcoat.
|
91 KB |
|
|
| ADHERE-IT II® |
ADHERE-IT II is a breakthrough product specifically developed
for dramatically increasing the bond of UNITED'S ROOF
MATE Topcoat
to new or weathered black EPDM surfaces.
|
72 KB |
|
|
| ACRYLEX 400 Primer |
ACRYLEX 400 is a single component, premium quality
exterior acrylic latex primer providing corrosion protection, flash
rust resistance and enhanced adhesion over steel, aluminum and galvanized
metal surfaces.
|
70 KB
|
|
|
| ACRYSHEEN |
ACRYSHEEN is a water-based, penetrating
sealer designed to produce a clear, semi-gloss surface sheen.
|
67 KB
|
|
|
| ELASTUFF 101/102/103 |
ELASTUFF 101/102/103 is a high solids,
moisture-catalyzed, single-component polyurethane coating system
designed for protecting a wide range of substrates from the effects
of weathering and moisture intrusion. It is particularly effective
as a protective membrane over polyurethane foam on new or existing
roofs, and hot or ambient storage tanks. ELASTUFF 101/102/103, a UV-resistant, 100% aliphatic polyurethane topcoat. ELASTUFF 103 is a low VOC version of the aliphatic topcoating, which meets all known VOC regulations.
|
89 KB |
|
|
| PRIMER 302 LV |
PRIMER 302 LV is a two-component, high performance corrosion resistant primer. It combines corrosion inhibiting pigments with a crosslinking polymer resin to form a highly stable polymer-pigment matrix. PRIMER 302 LV creates a physical and chemical bond between the substrate and polyurethane/polyurea elastomers. This superior bond strength is achieved by chemically crosslinking the polymer in the primer to the polyurethane/ polyurea elastomer topcoat.
|
178 KB |
|
|
| |
|
|
|
|
UNI-CAPS
(1,476 per roll) |
UNI-CAPS are an innovative, new method of preventing
leaks, rust and backout of metal roof fasteners.
|
37 KB
|
|
|
UNI-TAPE Butyl-backed
(2"X50') (4"X50') (6"X50') |
UNI-TAPE is a butyl-backed woven
polymer reinforcing fabric designed for application to a wide range
of substrates where additional strength is required over seams, splits,
transitions, protrusions, etc.
|
82 KB
|
|
|
| UNIBASE |
UNIBASE is a low viscosity, highly penetrating, advanced acrylic
polymer adhesive and primer that develops a tenacious bond to existing
roof substrates.
|
73 KB
|
|
|
| UNISEAL Primer |
UNISEAL is a clear, single-component
epoxy primer/sealer designed to penetrate and seal porous substrates
and to improve the adhesion of high performance topcoats.
|
66 KB |
|
|
| UNITED CLEANING CONCENTRATE (UCC) |
UNITED CLEANING CONCENTRATE was especially
developed for the proper cleaning of existing elastomeric coating
on roofs, metal surfaces, concrete and masonry substrates as well
as uncoated roof, deck and wall surfaces.
|
70 KB |
|
|
| |
|
|
|
|
| 9.16.08 |
|
|
|
|
|
